Green SNG

If a green energy source and CO2 are available, synthetic natural gas (SNG) production is a fantastic route to sustainability. CO2 is converted via methanation and the resulting gas can be directly injected into the existing gas grid.

Green SNG benefits

  • captures CO2 (CO2 + 4 H2 --> CH4 + 2 H20)

  • can be injected into the gas grid

  • can be used as energy storage and converted back into electricity anytime

  • can be used directly in the sectors heating, industry and mobility

Why SNG is the multitool of energy transition

Once hydrogen has been produced, the question of its use arises. In most locations where renewable energy is widely available, some form of storage for later use is required. Converting hydrogen into methane (the main ingredient of SNG) has numerous advantages.

Gas storage capacity stands at 1131 TWh and gas storage facilities across EU28 can deliver up to 22 TWh of natural gas per day. The storage capacity represents 21% of annual gas consumption in Europe.

Gas Infrastructure Europe (GIE)

Of course, where possible it is best to use existing infrastructure such as the natural gas grid to store large energy quantities. The size and scale of the gas grid are particularly important with regard to winter or other times when the availability of solar and wind energy is low.

Methanation solutions from a single source

thyssenkrupp is very proud to be in a position to offer its customers all key technologies and a century of global EPC excellence. tkUCE's alkaline water electrolysis can be coupled with our green ammonia and green methanol technology which have been proven in the Carbon2Chem® project supported by the german government. The methanation process has also been proven in the STORE&GO demonstration project in Falkenhagen, Germany.

As a global technology and EPC partner, we can look back on the experience gained from more than 2,500 plants built worldwide.

Methanation by thyssenkrupp - briringing SNG to scale

A milestone for proving the efficiency of our methanation process was the demonstration plant in Falkenhagen, Germany. In the STORE&GO project, 47 m3/h of SNG were generated using renewable sources and injected into the gas grid (ONTRAS). Based on this great success and our operational experience, thyssenkrupp has developed a process & layout concept for a 20 MW unit that produces 1000 m3/h. The end product is H-gas (high calorific gas) quality. Our state-of-the-art design is synonymous with:

  • Minimized CAPEX & OPEX

  • Optimized heat integration

  • Proven operating concepts for start-up and stand-by

  • Reactor concepts for higher capacities available

STORE&GO Demonstration Unit

  • Renewable hydrogen: 210 m³/h (from existing PtG plant)

  • Biogenic CO2: 52.5 m³/h (external supply)

  • SNG production: 57 m³/h (catalytic)

  • Injection of SNG into natural gas grid (ONTRAS)

  • Start of operation: Q2 2018, end of operation: Q1 2020